The HOT WING is designed for Camera Flyers in hot temperatures.
What's unique about the Hot Wing? Any unnecessary material has been removed, including the front.
No collar, no zipper, no waistband.
There are straps across the chest and waist, held closed with two Fastec clips.
The Sleeves end at the forearm, but the wing can extend further down the arm.
Three wing sizes are available for this jacket model, this excludes the D-Wing.
A-Wing Specs
The original camera wing. Medium wing, attaching below the leg strap.
For a camera suit or camera jacket, this is a medium sized wing sewn directly into the side seam (as opposed to sewn onto the front of the arm) and attaches below the leg strap. The front of the wing has Nylon to give lift, and the back has Taslan for support.
Wing Reach
This wing reaches from mid-forearm and attaches below the leg strap.
Wing Attachment Point
This wing fastens with the standard Fastec® clip. A brass R.S.L clip is available upon request. FOR JACKETS: sew the Fastec® clip loop to the leg and then clip it to the wing. (Ask a rigger for help)
Lateral Band
It is very important that the wing does not extend below the rig's lateral band or a folding of the wing will occur, inhibiting the wing dynamics.
B-Wing Specs
This is the smallest camera wing with no attachment clip.
For a camera suit or camera jacket, this small wing is sewn directly into the side seam and stops at the waist, with no attachment clip. The front of the wing has nylon to give lift, and the back has Taslan® for support.
Wing Reach
This wing reaches from mid forearm and stops at the waist.
Lateral Band
It is very important that the wing does not extend below the rig's lateral band or a folding of the wing will occur, inhibiting the wing dynamics.
C-Wing Specs
The most popular camera wing! It is a medium wing for belly or back flying.
For a camera suit or camera jacket, this is a medium sized wing sewn onto the front of the arm to aid in back-flying. The front of the wing has nylon to give lift, and the back has Taslan® for support.
Wing Reach
This wing reaches from mid-forearm and attaches to the leg strap.
Wing Attachment Point
Fastens with the standard Fastec® clip. A brass R.S.L clip is available upon request. To attach the Fastec® clip loop, feed the leg strap through the loop and clip it to the wing. (Ask a rigger for help).
Lateral Band
It is very important that the wing does not extend below the rig's lateral band or a folding of the wing will occur, inhibiting the wing dynamics.
RSL Wing Attachment Point
A-Wing or C-Wing
Loop the tail around the leg strap and clip to itself.
Do not clip to the harness and leave a long tail. This can cause a large enough opening for a pilot chute to go through or entangle with.
We suggest you print the Measurement Guide PDF so you can write down the measurements, and we recommend wearing the clothes you're likely to jump in while taking measurements.
RETURN POLICY ON STOCK SUITS AND STORE ITEMS
TonySuits will accept returns for stock suits and store items with a restocking fee of $100 per box. Shipping cost back to TonySuits will be the customer's responsibility.
CUSTOM SUIT WARRANTY/RETURN POLICY
Every custom TonySuits product is manufactured at our Zephyrhills, Florida facility and is made-to-order with specific customer sizing and design. Due to this customization, there is a 35% restocking fee for any RETURN or REFUSAL to take possession of a product they ordered.
TonySuits has a 90 day fit warranty. This includes only items that are inconsistent with the original order as placed by the customer or dealer. Shipping will be included both ways for approved full warranties. Note: 90 days begins on the shipped date.
- Returns for alterations will begin at $60 and require an email approving return shipment. The email must include the suit serial number (located inside the inner pocket), photos (-with rig on) from all angles and a complete written description of the areas to address. Please print and include inside the shipment.
For products with fit issues, we will review and work with the customer/dealer on a case by case basis.
WARRANTY IS VOIDED WHEN:
- The suit is built to the measurements provided. In that case, replacement will be priced on a case by case basis.
- Unauthorized repairs (those not approved by TonySuits in advance) are done on the suit.
- Notification is received at TonySuits after 90 days from the ship date. These requests will be reviewed and resolved on a case by case basis.
- You choose NOT to follow the TonySuits maintenance and care instructions included with the original shipment.
OPTIONS TO ADD CONTROL
- Add a set of BC Power Sleeves
- Add Swoop Cords
- Upgrade gripper material to Cordura
GO FASTER
- Model: The Pit Jacket
OPTIONS TO GO FASTER
- Slick Nylon Front and Upper Arms
- Spandex Forearms
- Smaller grippers
GO SLOWER
- Model: Slow RW Jacket
- Model: Freefly Jacket
- Model: HotWing Jacket
- Model: Camera Jacket
OPTIONS TO GO SLOWER
- 4-PLY Front and Upper Arms
- Cordura Forearms
- Mesh lining
- Swoop Cords
- Level 1 -3 drag
- B.C. Power Sleeve forearm inserts
- Ask for “more material at the armpit
OPTIONS TO ADD CONTROL
- Add a set of BC Power Sleeves
- Add Swoop Cords
- Upgrade gripper material to Cordura
GO FASTER
- Model: The Pit Jacket
OPTIONS TO GO FASTER
- Slick Nylon Front and Upper Arms
- Spandex Forearms
- Smaller grippers
GO SLOWER
- Model: Slow RW Jacket
- Model: Freefly Jacket
- Model: HotWing Jacket
- Model: Camera Jacket
OPTIONS TO GO SLOWER
- 4-PLY Front and Upper Arms
- Cordura Forearms
- Mesh lining
- Swoop Cords
- Level 1 -3 drag
- B.C. Power Sleeve forearm inserts
- Ask for “more material at the armpit